Bronx, NY · NYC & tri-stateMon–Fri 9 am – 5 pm · Weekends by appointment
Servplus Global Access Servplus Global Access Request an Install Quote

Installation only · Bronx, NY · NYC metro & tri-state

You print it.
We put it up right.

Servplus Global Access is a dedicated sign and graphics installation crew. We don't design, print or fabricate. We install your finished vehicle wraps, window film, wall graphics and signs, on schedule, with photo-documented sign-off on every job.

3M-certified graphics installer White-label for print & sign shops Photo report on every install
Full vinyl wrap installed on a transit-station kiosk
Full kiosk wrap · transit station
Install onlyNo printing or design. We never compete with your shop.
3M-certifiedTrained on wrap and film application standards.
On-site or in-bayStorefronts, fleets, offices, job sites.
Tri-state reachFive boroughs, Westchester, Long Island, NJ, CT.

Recent installs

Recent installs across New York.

A sample of recent jobs: fleet vans, storefront glass, brick walls, lobby graphics and signage. Tap any photo to see it larger.

What we install

Every graphic and sign type, installed by one crew.

You or your print partner supply the finished product. We handle site prep, application, finishing and cleanup, and leave the job photographed and signed off.

Commercial van graphics
Commercial van graphics

Vehicle Wraps & Fleet Graphics

Full and partial wraps, plus lettering for single vehicles or entire fleets.

  • Full, partial & spot wraps
  • Cargo vans, box trucks & trailers
  • DOT numbers & door lettering
  • Color-change wraps
  • Fleet roll-outs, scheduled around your routes
Frosted door film
Frosted door film

Window Film & Glass Graphics

Storefront glass and interior partitions, inside or out.

  • Perforated (one-way vision) film
  • Frosted, etched & privacy film
  • Decorative & dusted-crystal film
  • Hours, logos & door vinyl
  • Glass manifestation & safety markings
Brick-wall lettering
Brick-wall lettering

Walls, Murals & Floors

Large-format interior graphics, seamed and aligned panel by panel.

  • Wall murals & wallcoverings
  • Cut-vinyl logos & lettering
  • Textured-wall & brick films
  • Floor graphics & wayfinding decals
  • Elevator, stair & column wraps
Standoff acrylic panels
Standoff acrylic panels

Signs & Dimensional Letters

Mounting for fabricated signs, laid out with patterns and level lines.

  • Acrylic, PVC & metal dimensional letters
  • ACM, Dibond & rigid panel signs
  • Standoff-mounted lobby signs
  • ADA & interior room signage
  • Non-illuminated channel-letter mounting*
Lobby wall graphic
Lobby wall graphic

Retail, Promo & Event

Fast change-outs for campaigns, openings and pop-ups, including off-hours work.

  • Seasonal & promo window change-outs
  • Banners & banner hardware
  • Construction barricade & fence graphics
  • Trade-show & event graphics
  • Multi-location roll-outs
On-site glass prep & install
On-site glass prep & install

Removal & Surface Prep

Clean surfaces before the new graphic goes on, with adhesive residue fully removed.

  • Wrap & decal removal
  • Window film & old lettering removal
  • Adhesive residue cleanup
  • Sign take-down & hole patching
  • Site survey & field measurements

Our scope is installation. We work with finished, print-ready or fabricated materials supplied by you or your vendor. *Electrical connections for illuminated signs are completed by your licensed electrician; permits and landlord approvals remain with the sign owner or fabricator.

Pricing

What affects the cost of an install.

Every quote is fixed before we schedule. These five things move the number most.

01

Size & coverage

Total square footage, number of panels, and full vs. partial coverage.

02

Surface

Glass, smooth paint, brick, textured walls or corrugated truck sides each install differently.

03

Access & height

Ladder, scaffold or lift work, tight spaces, parking and loading conditions.

04

Removal

Taking off old wraps, film or lettering and cleaning adhesive residue first.

05

Timing

Rush jobs, nights and weekends are scheduled by appointment.

Send your proof and measurements, or use the square-footage calculator in the quote form.

For sign shops, printers & agencies

Your install crew, without the overhead.

Most of our work is subcontracted from sign shops and print providers. We show up as your team, keep your customer relationship yours, and report back to you.

What you get

  • White-label service. No Servplus branding, cards or pricing shown to your customer.
  • Clear quotes. Priced by square footage, job type and access, before we schedule.
  • Photo report. Before, during and after photos with site notes, sent the same day.
  • On-site sign-off. We walk the finished job with the site contact and record approval.
  • Straight communication. If the site, surface or files don't match the order, you hear about it before we install.

What we need from you

  • Finished graphics, printed, laminated and paneled, labeled to match the proof.
  • The approved proof with dimensions and placement marked.
  • Site details: address, contact, access hours, parking or loading notes.
  • Hardware or templates for dimensional and mounted signs.
  • Vehicle info for wraps: year, make, model and current condition.
Sign shopsFranchise sign centersLarge-format printersCreative & experiential agenciesGeneral contractorsProperty managersFleet ownersRetail brands

Ready for your next install?

Send the job details today and get a fixed install quote. Sign shops, ask about white-label scheduling.

How a job runs

From work order to sign-off in five steps.

The same sequence on every job, whether it's one window decal or a twenty-van fleet.

  1. Send the job

    Share the proof, sizes, site address and target date. Use the quote form or email.

  2. Survey & quote

    We review surfaces and access, measure on site if needed, and send a fixed install quote.

  3. Schedule

    We book a time that fits the site, including evenings and weekends by appointment.

  4. Prep & install

    Clean, degrease and remove old graphics, then apply, trim, seal edges and post-heat.

  5. Inspect & report

    Final walkthrough, site sign-off, and a photo report delivered the same day.

Installer applying printed window graphics on a building exterior
On site · prep, apply, inspect, sign off

Install standards

The details that make graphics last.

Most graphic failures start at installation: dirty surfaces, cold application, unheated recesses. We follow the film manufacturer's instructions on every job.

Certified application

3M-certified installation for wrap and film work, following manufacturer application guidelines.

Documented every time

Photos of surface condition before we start, and of the finished install, for your records and warranty claims.

Measured, not guessed

Field measurements and square-footage takeoffs so your print order matches the real surface.

Acrylic panels leveled with a laser line
Laser-leveled layout before every mount.
Surface prep
Wash, degrease, then isopropyl alcohol wipe. Paint and seals checked for failure before film goes on.
Conditions
Surface and air temperatures checked against the film's minimum application temperature. Outdoor jobs rescheduled for rain.
Application
Panels aligned to the proof, with overlaps placed away from sightlines. Air-release and wet-apply methods matched to the media.
Recesses & edges
Post-heated to the manufacturer's temperature so the film holds its shape in channels and corrugations.
Trimming
Knifeless tape near paint and glass seals. No blade scoring on vehicle paint.
Handover
Walkthrough, care instructions for the owner, photo report and recorded sign-off.

Service area

Based in the Bronx. Working across the tri-state.

We go to the job: storefronts, office lobbies, construction sites, parking lots and shop bays. Outside the listed areas, ask about travel scheduling for larger projects and roll-outs.

Check availability for your site
Bronx & Upper ManhattanHome base
Same / next day
Manhattan, Queens, BrooklynAll five boroughs, including Staten Island
Core area
Westchester & RocklandNew Rochelle, Yonkers, White Plains and beyond
Regular service
Northern & Central New JerseyBergen, Hudson, Essex, Passaic and more
Regular service
Long IslandNassau and Suffolk
Regular service
Fairfield County, CTStamford, Norwalk, Bridgeport
By schedule

Questions

Frequently asked

Do you print or design graphics?

No. Servplus is installation only. You or your sign shop provide finished, print-ready or fabricated materials, and we install them. That keeps us out of competition with the shops we work for.

How do you price an installation?

Mainly by square footage and job type, adjusted for surface condition, access (ladders, lifts, height), removal of old graphics, and time of day. Send the proof and sizes and we'll return a fixed quote before scheduling.

Can you work under my company's name?

Yes. White-label installs are standard for us. We arrive as your crew, use no Servplus branding with your customer, and report back to you only.

Do you work nights and weekends?

Yes. Retail change-outs, office lobbies and fleet vehicles often have to be done outside business hours. Evening, night and weekend installs are by appointment. Tell us the site's access window when you request a quote.

What happens if the surface or graphics aren't right on arrival?

We check before we install. If paint is failing, glass seals are damaged, or panels don't match the proof, we photograph the problem and contact you before going further. We don't install over a problem and leave it for you to discover later.

Do you install illuminated signs?

We mount and level non-illuminated and illuminated sign bodies. Electrical connections are completed by a licensed electrician arranged by the sign owner or fabricator.

Do you handle permits or landlord approval?

No. Permits, Landmarks review and building-management approval stay with the sign owner or fabricator. We work to the approved drawings and can provide site photos and measurements to support the application.

How much notice do you need?

For most single-site jobs, a few business days. Fleet roll-outs and multi-location projects are scheduled together with you. Urgent jobs in the Bronx and Manhattan can often be fit in sooner.

Request an install quote

Tell us about the job.

Add the sizes and we'll calculate square footage as you go. The more detail you include, the faster you get a firm number.

What needs installing?
Square-footage calculatorInches → sq ft
Total: 0.0 sq ft